FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//

====== Remote monitoring of stations’ status ======

===== Conky =====

==== Conky dashboard via X-forwarding ====

In this case, we proceed in the same way as launching any other application with a remote x terminal. Connect to server space.astro.cz with respective parameters -XY. 


  ssh -XY space.astro.cz

Similarly, connect to a chosen station. 

  ssh -XY TEST-BPB.tunnel

Run conky from terminal.
  conky -o 

The ‘’-o’’ parameter causes that a separate window is generated on the screen.

An example of config file .conkyrc, which is currently on most of our stations:

  background		yes
  use_xft			yes
  xftfont			Courier:size=12
  double_buffer		yes
  update_interval		2
  alignment		top_right
  gap_x			10
  gap_y			10
  no_buffers		yes
  minimum_size 		365x500
  pad_percents		3 
  
  TEXT
  ${color #FF6666}$nodename - $sysname $kernel
  ${color #6666FF}Uptime: $uptime
  RAM: $memperc% ${membar 8}
  Swap: $swapperc
  CPU: $cpu% ${cpubar 8}
  CPU Temp: ${acpitemp}C
  ${color #FFFF00}/       ${fs_used /}/${fs_size /}${alignr}${fs_used_perc /}%
  ${fs_bar 8 /}
  ${color #00FF00}Down: ${downspeedf eth0}k/s ${alignr}${totaldown eth0} total
  ${downspeedgraph eth0}
  ${color #00FF00}Up: ${upspeedf eth0}k/s ${alignr}${totalup eth0} total
  ${upspeedgraph eth0}
  ${color #3ff}${font Courier:bold:size=16}Station Status:${font}
  sdr-widget${hr 2}
    ${if_running sdr-widget}${color green}Running
    Connected (${tcp_portmon 3701 3701 count}):
      ${tcp_portmon 3701 3701 rip 0} ${tcp_portmon 2001 2001 rport 0}
      ${tcp_portmon 3701 3701 rip 1} ${tcp_portmon 2001 2001 rport 1}
      ${tcp_portmon 3701 3701 rip 2} ${tcp_portmon 2001 2001 rport 2}${else}${color red}Not running${endif}${color 3ff}
  radio-observer${hr 2}
    ${if_running radio-observer}${color green}Running${else}${color red}Not   running${endif}${color 3ff}
  frequency-guard.py${hr 2}
    běží i neběží - je třeba dodělat
  ntpd${hr 2}
    ${if_running ntpd}${color green}Running${else}${color red}Not running${color #3ff}${endif}${color 3ff}
  gpsd${hr 2}
    ${if_running gpsd}${color green}Running${else}${color red}Not running${color #3ff}${endif}${color 3ff}

==== SSH connection for data transfer ====

In case of a direct connection to more stations, you can use [[https://github.com/plasidu/tellconky|tellconky]] tool.