Differences

This shows you the differences between two versions of the page.

--- en:registration [2014/07/30 14:41] – created fluktuacia
+++ en:registration [2019/03/28 16:36] (current) – fluktuacia
@@ Line 1: / Line 1: @@
+===== How to register an observatory to the Bolidozor network =====
+Observatory is a place where multiple measurement stations or project can be situated. The typical example of that place is an astronomical observatory.
-===== How to register at the BOLIDOZOR network =====
 Stations send files containing measured data to the server space.astro.cz through SCP protocol. At first, a station has to generate a key pair (if it has not done it already), that will be used for station authentication when communicating with server.
@@ Line 37: / Line 37: @@
 After the registration you will be able to upload your data to server [[http://space.astro.cz/|space.astro.cz]].
+==== Remote access to station ====
+In case, there will be a service intervention necessary, it is helpful to activate a reverse ssh tunnel, which can provide a remote access to station.
+This can be done by running the following commands:
+  wget http://space.astro.cz/bolidozor/support/scripts/setup_reverse_tunnel.sh
+  chmod +x ./setup_reverse_tunnel.sh
+  sudo ./setup_reverse_tunnel.sh
+The script lists the parameters set - e.g.
+  Host radio-test.tunnel
+    Port 4958
+    HostName space.astro.cz
+    User testak1
+These have to be copied and sent to the same address as in case of [[en:registration|station’s registration]].