User Tools

Site Tools


en:rmds-monitoring

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:rmds-monitoring [2019/03/29 15:20] (current)
fluktuacia created
Line 1: Line 1:
 +FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
 +
 +====== Remote monitoring of stations’ status ======
 +
 +===== Conky =====
 +
 +==== Conky dashboard via X-forwarding ====
 +
 +In this case, we proceed in the same way as launching any other application with a remote x terminal. Connect to server space.astro.cz with respective parameters -XY. 
 +
 +
 +  ssh -XY space.astro.cz
 +
 +Similarly, connect to a chosen station. ​
 +
 +  ssh -XY TEST-BPB.tunnel
 +
 +Run conky from terminal.
 +  conky -o 
 +
 +The ‘’-o’’ parameter causes that a separate window is generated on the screen.
 +
 +An example of config file .conkyrc, which is currently on most of our stations:
 +
 +  background yes
 +  use_xft yes
 +  xftfont Courier:​size=12
 +  double_buffer yes
 +  update_interval 2
 +  alignment top_right
 +  gap_x 10
 +  gap_y 10
 +  no_buffers yes
 +  minimum_size 365x500
 +  pad_percents 3 ​
 +  ​
 +  TEXT
 +  ${color #​FF6666}$nodename - $sysname $kernel
 +  ${color #​6666FF}Uptime:​ $uptime
 +  RAM: $memperc% ${membar 8}
 +  Swap: $swapperc
 +  CPU: $cpu% ${cpubar 8}
 +  CPU Temp: ${acpitemp}C
 +  ${color #​FFFF00}/ ​      ​${fs_used /​}/​${fs_size /​}${alignr}${fs_used_perc /}%
 +  ${fs_bar 8 /}
 +  ${color #​00FF00}Down:​ ${downspeedf eth0}k/s ${alignr}${totaldown eth0} total
 +  ${downspeedgraph eth0}
 +  ${color #00FF00}Up: ${upspeedf eth0}k/s ${alignr}${totalup eth0} total
 +  ${upspeedgraph eth0}
 +  ${color #3ff}${font Courier:​bold:​size=16}Station Status:​${font}
 +  sdr-widget${hr 2}
 +    ${if_running sdr-widget}${color green}Running
 +    Connected (${tcp_portmon 3701 3701 count}):
 +      ${tcp_portmon 3701 3701 rip 0} ${tcp_portmon 2001 2001 rport 0}
 +      ${tcp_portmon 3701 3701 rip 1} ${tcp_portmon 2001 2001 rport 1}
 +      ${tcp_portmon 3701 3701 rip 2} ${tcp_portmon 2001 2001 rport 2}${else}${color red}Not running${endif}${color 3ff}
 +  radio-observer${hr 2}
 +    ${if_running radio-observer}${color green}Running${else}${color red}Not ​  ​running${endif}${color 3ff}
 +  frequency-guard.py${hr 2}
 +    běží i neběží - je třeba dodělat
 +  ntpd${hr 2}
 +    ${if_running ntpd}${color green}Running${else}${color red}Not running${color #​3ff}${endif}${color 3ff}
 +  gpsd${hr 2}
 +    ${if_running gpsd}${color green}Running${else}${color red}Not running${color #​3ff}${endif}${color 3ff}
 +
 +==== SSH connection for data transfer ====
 +
 +In case of a direct connection to more stations, you can use [[https://​github.com/​plasidu/​tellconky|tellconky]] tool.
 +
 +
  
en/rmds-monitoring.txt · Last modified: 2019/03/29 15:20 by fluktuacia